Maple Leaf Image We’re Your Atlantic Canadian Team!

Maple Leaf Image We’re Your Atlantic Canadian Team!

How to Install Sliding Barn Doors

August 10, 2026

How to Install Sliding Barn Doors

Materials You Will Need

  • Chalk line
  • Table saw, chop saw, or circular saw
  • 80-grit sanding sponge
  • 400-grit sandpaper
  • Paint brush, roller, and tray
  • Metal putty knife
  • Nail gun
  • Stud finder
  • Measuring tape
  • 2-inch nails
  • Hammer
  • 1/8-inch spacers
  • Level
  • Spackle or wood filler

Measure First

  • Measure your wall carefully and calculate the amount of shiplap needed, including a little extra material for cuts and adjustments. Ensure base trim is installed and verify that surfaces are level and square.
  • If you choose to create custom boards from plywood, calculate your total square footage and ensure the board widths divide evenly across the wall.
  • Always use appropriate personal protective equipment when cutting boards. Sand all cut edges smooth and apply paint or stain before installation if desired.
  • Remove any existing trim using a putty knife. Locate and mark wall studs with a stud finder, then create vertical chalk lines for fastening. Mark a horizontal chalk line approximately 1/4 inch above the floor to provide room for expansion and contraction.

Lock It In

  • Familiarize yourself with how the shiplap boards fit and lock together before installation. Always wear appropriate personal protective equipment when cutting or handling materials.
  • Test-fit each board before fastening it to the wall. Work methodically from one side of the wall to the other, securing each board with evenly spaced nails driven into the wall studs whenever possible.
  • Lock each board into the previous row while staggering seams for a more natural appearance. If using custom-cut boards, insert 1/8-inch spacers between rows and remove them as installation progresses. Trim the final board if necessary to achieve a proper fit.

Polish It Off

  • After installation is complete, fill nail holes with spackle or wood filler, sand the repaired areas smooth, and reinstall any trim or baseboards that were removed.
  • Use 400-grit sandpaper to smooth rough spots, apply caulk along exposed edges and seams, and finish the wall with additional paint or stain as desired.

Create your dream design with a little help from KENT and transform your space with a beautiful DIY shiplap wall.

Product added to your cart
Loading...