For This Project You Will Need
- Prehung Door
- Door Trim
- Shims
- Adhesive
- Level
- Nail Gun (or finish nails and a hammer)
- Measuring Tape
- Caulking
- Wood Filler
1. Choose Your Style
Interior prehung doors are available in a wide variety of styles, giving you the flexibility to match your home's dcor and design preferences.
For this project, a Metrie 5-Panel Riverside Door was used, but any prehung door style can be installed using the same general process.
2. Determine Size & Swing
Measure the rough opening to determine the correct prehung door size. Be sure to account for the space required for shims and proper installation tolerances.
In this example, the rough opening measured 32 inches wide, so a 30-inch prehung door was selected to allow room for adjustment and installation.
Next, determine the door swing direction. Consider nearby furniture, walls, and light switches to ensure the door opens conveniently without obstructing the room layout.
3. Install Your Door
Place the prehung door into the rough opening and center it as evenly as possible within the space.
Use a level to verify that the door jamb is plumb. A plumb jamb ensures the door hangs correctly and operates smoothly once installation is complete.
4. Level the Door
Insert shims between the door jamb and framing until the door is perfectly level and square. Secure the shims with nails.
Trim away any excess shim material using a utility knife or saw after fastening.
Keep the door closed while shimming both sides. This helps maintain alignment and ensures the door remains square throughout the installation process.
The shipping latch installed in the door frame helps maintain proper spacing and alignment until installation is complete.
5. Secure the Door
Once the door is properly aligned, additional shims can be installed above the door frame for extra support.
For increased stability, apply PL Premium Construction Adhesive to the shims before fastening them permanently into place.
Allow the adhesive to cure fully before proceeding with finishing work.
6. Add Your Trim
Measure from the floor to the top corners of the door frame to determine trim lengths.
Install the trim around the doorway and use a level to ensure each piece is straight. Fasten the trim to both the jamb and surrounding wall.
Fill nail holes using wood filler and seal any visible gaps with caulking .
For this project, a picture-frame trim style with 45-degree mitered corners was used to create a clean and modern appearance.
Trim Styles
Picture-frame trim is only one option. Other popular styles include straight-cut trim with a flat header or decorative headers such as a Boston Header .
The final appearance will also vary depending on the trim profile selected. Flat stock trim provides a clean contemporary look, while beveled and decorative profiles create more traditional styling.
7. Install Your Door Handle
After the door has been secured, install your door handle .
Most prehung doors include predrilled handle openings, simplifying installation. Follow the manufacturer's instructions included with the hardware kit for best results.
8. Paint Your Door
Once installation is complete, you can paint your door to match your dcor.
Most prehung interior doors come pre-primed, meaning they are ready for paint with minimal preparation.
For additional guidance, visit: How to Paint a Door .
